APEX Spacer Kit | 15mm | 5x112mm | 66.6mmAPEX Race Parts designs and manufactures high performance, flow formed and forged wheels for a growing list of vehicle makes. They are constantly expanding their product line with new wheel designs, wheel accessories and other performance and race parts. It is their mission to produce and distribute high quality performance parts that meet the demands of racing and street performance enthusiasts. PRODUCT INFORMATION Bolt Pattern 5x112mm Centre Bore
APEX Race Parts designs and manufactures high performance, flow-formed and forged wheels for a growing list of vehicle makes. They are constantly expanding their product line with new wheel designs, wheel accessories and other performance and race parts. It is their mission to produce and distribute high-quality performance parts that meet the demands of racing and street performance enthusiasts.
PRODUCT INFORMATION
Bolt Pattern5x112mm Centre Bore66.6mm Thickness15mm HubcentricYes ColoursBlack/Silver FinishAnodized ConstructionCNC Machined Materials6061-T6 Aluminium IdentificationLaser Engraved Kit QuantityTwo Spacers for One Axle
Please consider what extended bolts you will need for the spacers chosen, these can be found on our website
ADD SOME BREATHING ROOM
Make space for your mods. You can’t have your wheels and tyres rubbing on your suspension. Use wheels spacers to add enough clearance. There’s only one direction to go and that’s out.
CLEAR YOUR BRAKES
Not every wheel was destined to fit over your brakes. Give them a hand with wheel spacers to add the clearance necessary for those spokes to spin freely.
FILL YOUR FENDERS
Adequate clearance is a good thing, but excessive gap just doesn’t look right. Get your wheels flush with your fenders using APEX wheel spacers. Available in a wide variety of sizes to allow you to precisely dial in your fitment.
AVAILABLE IN A WIDE VARIETY OF SIZES
One size does not fit all. You’ll need a range of sizes at your disposal if you’re going to perfect your unique fitment. From thin to thick, APEX has your size needs covered.
HARDWARE REQUIRED... BUT OPTIONAL
Extended wheel hardware is required for spacers, but if you already own studs or lugs, you shouldn’t be required to purchase hardware with spacers. APEX wheel spacers can be purchased separately from extended hardware so the choice is up to you. Buy them on their own or pair them up with a stud kit or extended lugs & locks.
STUCK SPACERS SUCK
Say that 10 times fast. Save yourself from the headache. If you’ve owned spacers before, you’ve likely had one seized onto the hub. Instead of using a mallet to free it, utilize a tool meant for removal— a pry bar or screwdriver. APEX have added machined pry points around the spacer’s edge, making even the most seized spacers a breeze to remove.
STAND OUT BY BLENDING IN
You’ve worked hard on the colour scheme and coordination of your car and modifications. Spacers should not be any exception. They are meant to push wheels out, not stand out on their own. Available in two finishes— Black and Silver. Pick the one that compliments your ride.
STOUT CONSTRUCTION. UNWAVERING DEPENDABILITY.
For APEX, safety is paramount and to create a reliable, trustworthy spacer and relationship with the customer. APEX are passionate about racing, and would accept nothing less for themselves. Without question APEX had to utilize the best materials and employ military-grade construction methods. They ended up with a CNC machined, 6061-T6 Aluminium spacer with carefully chamfered edges, eliminated stress-risers, and appropriately lightweight design without sacrificing rigidity or surface area.
INSTANTLY IDENTIFIABLE
Remember trying to solve mystery of identifying spacers either on the car or as they sit loose inside of our tool boxes or parts pins? APEX do too. What started as scrawling numbers with a screwdriver evolved into clean, legible, laser-engraved size and measurement information on the spacer face and edges.
AS IF BMW CREATED THEM
Manufactured to perfectly match the measurements and tolerances of your BMW, these spacers are a natural extension of your wheel hub. Sloppy construction, uneven surfaces, and out-of-round shape will result in poor fit and cause vibrations.
NO, YOUR CAR ISN'T SUPPOSED TO SHAKE
At the end of the day, spacers are useless if they vibrate. APEX so confident in their spacers that if they cause any sort of vibrations or shakes, they’ll replace them. Simple as that.
WARNING
Wheel spacers are not intended to be stacked and doing so may result in damage or injury. Proper length extended hardware MUST be used in conjunction with wheel spacers. Wheel spacers are designed for off road use only are may not be legal in your state/territory.
I saw a similar Zugu case for my iPad and almost bought it, but it looked like my iPad might not fit, so I hunted and found this VIKESI case, which cost about 1/3 as much as the Zugu.
It's close to perfect. My iPad fits perfectly, and the almost infinite number of angles that it permits, along with magnets to hold it in place make it ideal for working on a desk or in my lap.
The only minor downside is that it's on the heavy side, probably because of the magnets. But unless you're travelling with it (I've switched to a small Fire tablet for travel), that won't be an issue.
Highly recommended.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on June 5, 2026
S
Verified Purchase
S. Sirico
Louisville, US
★★★★★ 5
ipad cover
Color: Rose
love it. light but durable. like how it can be hinged from either side horizontally. no can do vertically. great bargain and colorful, got pink, the stylus holders perfect
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 27, 2026
L
Verified Purchase
L Shavonne
Waukegan, US
★★★★★ 5
The magnet does not stick to the refrigerator as advertised.. UPDATE ( I love it and it does stick)
Color: Pink
Although it is a nice case, it seems sturdy and it is very beautiful, my main reason for purchasewas I loved the fact that it sticked to the refrigerator. I was very disappointed to see that it does not. It’s too heavy, and it immediately begins to slide. That is the reason why I could not give it more than three stars. It disappointed me enough to where I’m really considering returning the item.
UPDATE: I found out how to make a stick to the refrigerator and I absolutely love it! I changed my review and my stars! I’m really happy.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 11, 2026
S
Verified Purchase
Steve Chavez
Louisville, US
★★★★★ 4
Great Protection, Great Fit — One Small Flaw
Color: Forest Green
I really love this case. It protects the iPad well, fits perfectly, and is still easy to put on and take off. The pencil holder is especially nice — it keeps the Pencil secure without feeling loose or flimsy.
My only complaint is that some USB‑A to USB‑C adapters don’t have enough clearance to plug in. The edge of the case blocks certain adapters from seating properly. It’s the only issue I’ve run into, but it’s worth mentioning if you rely on chunkier adapters.
Aside from that, this is an excellent case and one I’m happy to use every day.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 9, 2026
R
Verified Purchase
Rosemary Raines
Omaha, US
★★★★★ 5
Ipad case
Color: Black
It is very well made! Sturdy and easy to use. Has a great stand to watch videos and such. Perfect fit for my IPad. Easy to install.
Promo Codes Available: